Apf/ad/bfd

**Tracer Round** · January 12th, 2005, 9:03 PM

Ok, I installed this back in December on my dedi and I know the status command but when I use it, it just gives me a log file that I have to scroll through. Is this normal? I see in the log file where the firewall gets initiated every few minutes. Shouldn't to always be on? I have looked in WHM in the current running processes and I cant tell that it is running unless it is under a different name. I know it has to be working somewhat because I had to open ports to get some of my programs to work but I am still not sure.

Also, I only know how to check the status of APF. Is there a status checker for AD and BFD or are they all in the same program?

Tracer

**Tracer Round** · January 16th, 2005, 9:09 PM

::Sur-bumped::

**Aric** · January 22nd, 2005, 10:29 PM

If you installed APF, etc. back in December, then there is a new version. You should consider installing it.

**Tracer Round** · January 23rd, 2005, 1:23 AM

Aric,

Thanks for the heads up. It took me a while to figure out which version I had installed and even longer to find out the currecnt version. I did have an older version and I have upgraded. I copied my ports to the new conf file but as I was looking, the config file never changed, unless I missed something. I guess there was no config changes with this update.

Everytime I start or restart APF, I always get this message and never a confimation that it started or the two OKs that it restarted.

lsmod: QM_MODULES: Function not implemented

Is this normal? I searched on the R-fx Pubilc Forums and other people have gotten this error too but nobody has given a fix or answer for it.

Tracer

qwertykb · January 23rd, 2005, 1:50 AM

Is it better to upgrade to the latest version? I'm not sure how to upgrade, support did it for me.

**Aric** · January 23rd, 2005, 4:11 PM

See my directions. You can just follow the "cut 'n' paste directions. For most servers it works just fine as-is, once you set monokern=1, but you may want/need to open other ports if you use any non-standard ones. Or, contact support again.

**Aric** · January 24th, 2005, 2:31 PM

Yes, the QM_modules warning is normal for kernels with LKM support disabled. There is nothing wrong.

Regards,

Aric

**Tracer Round** · January 24th, 2005, 4:16 PM

Ok, thanks again for the great replies, Aric.

Tracer

January 12th, 2005, 9:03 PM	#1 (permalink)
Tracer Round MR. SECURITY Excelling Contributor Joined in Jun 2004 Lives in Orlando, USA Hosted on SH129 722 posts Gave thanks: 4 Thanked 1 Time in 1 Post	Apf/ad/bfd Ok, I installed this back in December on my dedi and I know the status command but when I use it, it just gives me a log file that I have to scroll through. Is this normal? I see in the log file where the firewall gets initiated every few minutes. Shouldn't to always be on? I have looked in WHM in the current running processes and I cant tell that it is running unless it is under a different name. I know it has to be working somewhat because I had to open ports to get some of my programs to work but I am still not sure. Also, I only know how to check the status of APF. Is there a status checker for AD and BFD or are they all in the same program? Tracer __________________ 2005 Surpassies: Winner of Most Skilled Wordsmith SH129 - Power SH81 - OC5

January 16th, 2005, 9:09 PM	#2 (permalink)
Tracer Round MR. SECURITY Excelling Contributor Joined in Jun 2004 Lives in Orlando, USA Hosted on SH129 722 posts Gave thanks: 4 Thanked 1 Time in 1 Post	::Sur-bumped:: __________________ 2005 Surpassies: Winner of Most Skilled Wordsmith SH129 - Power SH81 - OC5

January 23rd, 2005, 1:23 AM	#4 (permalink)
Tracer Round MR. SECURITY Excelling Contributor Joined in Jun 2004 Lives in Orlando, USA Hosted on SH129 722 posts Gave thanks: 4 Thanked 1 Time in 1 Post	Aric, Thanks for the heads up. It took me a while to figure out which version I had installed and even longer to find out the currecnt version. I did have an older version and I have upgraded. I copied my ports to the new conf file but as I was looking, the config file never changed, unless I missed something. I guess there was no config changes with this update. Everytime I start or restart APF, I always get this message and never a confimation that it started or the two OKs that it restarted. lsmod: QM_MODULES: Function not implemented Is this normal? I searched on the R-fx Pubilc Forums and other people have gotten this error too but nobody has given a fix or answer for it. Tracer __________________ 2005 Surpassies: Winner of Most Skilled Wordsmith SH129 - Power SH81 - OC5

January 24th, 2005, 4:16 PM	#8 (permalink)
Tracer Round MR. SECURITY Excelling Contributor Joined in Jun 2004 Lives in Orlando, USA Hosted on SH129 722 posts Gave thanks: 4 Thanked 1 Time in 1 Post	Ok, thanks again for the great replies, Aric. Tracer __________________ 2005 Surpassies: Winner of Most Skilled Wordsmith SH129 - Power SH81 - OC5

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

January 22nd, 2005, 10:29 PM	#3 (permalink)
Aric Just Some Guy.. Comfy Contributor Joined in Oct 2003 127 posts Gave thanks: 0 Thanked 5 times	If you installed APF, etc. back in December, then there is a new version. You should consider installing it.

January 23rd, 2005, 1:50 AM	#5 (permalink)
qwertykb Registered User On a golden path... Joined in May 2004 372 posts Gave thanks: 0 Thanked 0 times	Is it better to upgrade to the latest version? I'm not sure how to upgrade, support did it for me.

January 23rd, 2005, 4:11 PM	#6 (permalink)
Aric Just Some Guy.. Comfy Contributor Joined in Oct 2003 127 posts Gave thanks: 0 Thanked 5 times	See my directions. You can just follow the "cut 'n' paste directions. For most servers it works just fine as-is, once you set monokern=1, but you may want/need to open other ports if you use any non-standard ones. Or, contact support again.

January 24th, 2005, 2:31 PM	#7 (permalink)
Aric Just Some Guy.. Comfy Contributor Joined in Oct 2003 127 posts Gave thanks: 0 Thanked 5 times	Yes, the QM_modules warning is normal for kernels with LKM support disabled. There is nothing wrong. Regards, Aric

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)